Last updated: 16/11/2026
Simufact is Cadence’s specialized simulation software ecosystem for metal manufacturing and processing. Comprising two core modules—Simufact Forming and Simufact Welding—it enables enterprises to accurately predict plastic deformation, residual stress, microstructural changes, and defect risks, cutting physical prototyping costs by up to 80%.
What is Simufact? Overview of Cadence’s Metal Manufacturing Simulation Solution
Simufact is a numerical simulation solution based on the Finite Element Method (FEM) and Finite Volume Method (FVM), designed specifically to analyze complex plastic deformation and thermal transitions during metal manufacturing processes.
Unlike general-purpose FEA software that requires complex problem setup and time-consuming mesh configuration, Simufact features an intuitive, process-oriented user interface (UI). Users can easily define simulation parameters by matching real shop-floor conditions—such as press speed, heat treatment cycles, and welding torch trajectories.
In modern manufacturing, critical issues such as die cracking, post-weld dimensional distortion, deep-drawing tearing, or unwanted Martensite phase transformation can be predicted and resolved entirely in a virtual environment. Powered by official technical documentation from Cadence, Simufact combines robust non-linear thermo-mechanical solver capabilities to serve as a vital digital bridge between CAD designs and actual production lines.

Simufact Forming: Simulation Solution for Metal Deformation and Manufacturing
Simufact Forming is a dedicated module engineered for solving metal plastic deformation problems across all thermal ranges: hot, cold, and warm forming. It gives engineers full control over forging, stamping, and rolling process chains in heavy industry.
Key metal forming processes supported by the software include:
- Closed-Die and Open-Die Forging (Hot/Cold Forging): Analyzes material flow, die filling, peak press force, folding/lapping risks, and die surface wear over repeated cycles.
- Sheet Metal Forming: Predicts springback, wrinkling, thinning, and tearing in deep drawing, stretch forming, and sheet bending operations.
- Flat, Shape, and Ring Rolling: Simulates continuous billet deformation through roll sets, helping control thickness uniformity, residual stress, and grain distribution.
- Mechanical Joining: Analyzes riveting, clinching, and self-piercing riveting (SPR) processes for multi-material structural assemblies.
- Metal Extrusion: Predicts aluminum or steel billet flow through extrusion dies, controlling velocity profiles and heat buildup at the die land.
The software features an advanced auto-remeshing solver engine. When extreme deformation distorts the mesh and threatens mathematical convergence, the system automatically regenerates high-quality meshes while preserving the deformation history, thermal distribution, and stress state. This allows engineers to simulate complex, multi-stage volume forging processes without manual intervention.

Simufact Welding: Controlling Residual Stress and Distortion in Industrial Welding
Welding naturally involves localized high heat input, causing shrinkage, structural distortion, and dangerous residual stress buildup. Simufact Welding was developed to rigorously evaluate and control these coupled thermal, mechanical, and metallurgical interactions.
This module supports a broad spectrum of industrial welding and heat treatment technologies:
- Arc Welding: Analyzes GMAW/MIG/MAG, TIG, and Submerged Arc Welding (SAW), featuring real-time heat source motion, filler wire feed rate, and bead deposition modeling.
- High-Energy Beam Welding (Laser & Electron Beam): Accurately predicts narrow Heat Affected Zones (HAZ) and penetration depth from high-density energy sources.
- Resistance Spot Welding (RSW): Predicts nugget size formation, clamping force effects, and sheet metal geometric distortion in automotive body-in-white production.
- Heat Treatment Processes: Simulates oil/water quenching, gas cooling, annealing, and tempering. It accurately calculates microstructural phase fractions (Austenite, Martensite, Bainite, Ferrite/Pearlite) and hardness profiles (HV/HRC) in compliance with ISO quality standards.
By simulating global thermal cycles, engineers can optimize welding sequences, clamping strategies, and heat input. This eliminates hot cracking, cold cracking, and post-cooling dimensional deviations.
Real-World Applications of Simufact in Key Industries
Simufact has become the benchmark simulation tool across major global manufacturing enterprises due to its ability to solve complex production challenges.
- Automotive Industry: Simulates hot stamping for rocker panels and A/B pillars; optimizes robotic welding sequences for chassis frames; evaluates springback in high-strength aluminum body panels.
- Aerospace Industry: Predicts grain structure evolution and defects in forged Titanium or Inconel compressor disks and turbine blades; controls distortion during electron beam welding of jet engine components.
- Energy & Heavy Equipment: Models multi-pass welding for large-diameter pressure vessels and LPG tanks; calculates stress-relief heat treatment for massive wind turbine main shafts.
- Machinery & Fastener Manufacturing: Simulates high-strength bolt cold heading, gear forging, crankshafts, and connecting rods—enabling preform optimization to reduce expensive raw material waste.
Integrating Simufact into the Cadence CAE Ecosystem and MSCONE Licensing
As a vital component of Cadence’s engineering portfolio, Simufact operates seamlessly within the broader Cadence CAE ecosystem.
Engineers can easily transfer mesh topologies and simulation results from Simufact into structural and durability solvers such as MSC Nastran, Marc, or Abaqus. Residual stresses and work-hardening data from manufacturing (forging or welding) serve as initial conditions for downstream fatigue life or crash tests—enabling a true Design for Manufacturing (DFM) workflow.
Furthermore, enterprises utilizing Cadence tools benefit from the flexible MSCONE Token licensing system. Instead of purchasing standalone licenses, the token system allows dynamic allocation of credits to run Simufact Forming, Simufact Welding, MSC Apex, or Marc based on project demands, significantly optimizing IT software expenditure.
5 Core Benefits of Simufact in Manufacturing Process Optimization
Implementing numerical simulation with Simufact directly resolves major financial and technical bottlenecks in metal manufacturing.
- Drastically Reduce Physical Prototyping Costs: Virtualizing 100% of trial runs eliminates costly physical die re-machining and scrap metal testing, saving substantial material and energy costs.
- Accelerate Time-to-Market: Detecting defects such as die cracking, lapping, or weld distortion early in the R&D stage reduces new product development cycles by 50% to 70%.
- Extend Tooling and Die Life: Analyzing peak press loads, surface contact stresses, and wear patterns allows engineers to optimize die geometry for maximum operational lifespan.
- Accurately Predict Residual Stresses and Distortion: Enables proactive distortion compensation in die cavity design or welding fixtures, ensuring finished parts meet strict CAD tolerances after cooling.
- Control Material Microstructure and Hardness: Accurately predicts phase transformations and grain size evolution during heat treatment, ensuring final parts meet stringent strength and impact toughness specifications.
Detailed Comparison: Simufact Forming vs. Simufact Welding
The following table outlines the key differences to help engineers select the appropriate Simufact module for their specific manufacturing requirements:
| Comparison Criteria | Simufact Forming | Simufact Welding |
|---|---|---|
| Primary Application | Metal plastic deformation (Forging, stamping, rolling, drawing, riveting, extrusion). | Welded joints and thermal processing (Arc/laser welding, spot welding, quenching/tempering). |
| Input Data | Workpiece/die CAD, stress-strain curves, press kinematics, friction coefficients. | Weld paths, heat source power, travel speed, fixture constraints, thermal cycles. |
| Core Results | Die filling, material folding/cracking, die wear, peak press force, springback. | Structural distortion, residual stress field, thermal maps, microstructural phase ratios (HV/HRC). |
| Solver Technology | Non-linear FEM / FVM solver with automatic remeshing capabilities. | Coupled Thermal-Mechanical-Metallurgical non-linear FEM solver. |
| Target Industries | Automotive components, fasteners, aerospace forgings, consumer hardware. | Shipbuilding, automotive frame/chassis, structural steel, pressure vessels, wind energy. |
4 Steps to Implement Metal Forming and Welding Simulation with Simufact
To achieve high simulation accuracy aligned with physical trials, engineering teams should follow this standardized 4-step workflow:
Step 1: Import CAD Geometry and Define Boundary Conditions
Import 3D models of the workpiece, dies, or welded assemblies from standard CAD formats (CATIA, NX, Creo, SolidWorks). Define operational boundary conditions such as press stroke profiles, welding speed, hold times, and fixture constraints.
Step 2: Assign Material Models and Thermo-Mechanical Properties
Select material data from integrated databases (e.g., MatILDa) or input experimental data following technical guidelines from the American Welding Society (AWS). Parameters include temperature-dependent stress-strain curves, thermal conductivity, expansion coefficients, and CCT/TTT phase transformation diagrams.
Step 3: Execute Simulation using Non-Linear Solvers
Run the non-linear solver engine. The software automatically handles coupled thermo-mechanical calculations and refines the mesh in regions of high plastic strain or steep thermal gradients along weld seams.
Step 4: Post-Process Results and Optimize Manufacturing Parameters
Visualize results via contour plots to check for material damage, overall warpage, and residual stress levels. If tolerances are exceeded, engineers modify the initial blank shape, adjust welding sequences, or redesign clamping fixtures prior to final production release.
Frequently Asked Questions (FAQ) About Simufact Software
Here are answers to common technical and licensing questions regarding Simufact software:
1. Does Simufact software require high-end computer hardware?
For standard forging or small-scale welding setups, a typical engineering workstation with an 8–16 core CPU, 32GB–64GB RAM, and a dedicated GPU performs well. For large structural assemblies or multi-stage volume forging requiring parallel computation, 32–64 core CPUs and 128GB+ RAM are recommended to minimize solve times.
2. How accurate are Simufact simulation results compared to real-world tests?
When correct material properties and shop-floor operating parameters are defined, Simufact typically achieves 90% to 95% correlation with physical test samples regarding geometry, peak loads, and hardness distribution.
3. Does Simufact support Metal Additive Manufacturing (3D Printing) simulation?
Yes. The ecosystem includes Simufact Additive, a dedicated module built specifically to simulate metal powder bed fusion processes (LPBF/DMLS). It predicts distortion, residual stresses, and helps optimize support structures before printing.
4. Can engineers without extensive FEA background learn Simufact easily?
Yes. Simufact is designed with a manufacturing-process-oriented UI rather than a complex mathematical FEA interface. Manufacturing and welding engineers can input familiar shop-floor parameters without needing deep expertise in element formulation or manual meshing.
5. What licensing options are available for Simufact software?
Enterprises can choose from perpetual licensing, annual subscriptions, or Cadence’s flexible MSCONE token system to share licensing budgets across multiple CAE software tools.
Simufact Technical Support in Vietnam from Authorized Reseller Solid & Soft
Manufacturing and R&D enterprises in Vietnam often face challenges adopting advanced non-linear simulation software due to high entry barriers or delayed technical support caused by language and time-zone differences.
Solid & Soft is the official authorized reseller of Cadence in Vietnam, providing genuine Simufact software licensing and end-to-end technical support. Solid & Soft’s team of factory-certified CAE application engineers offers local technical assistance in Vietnamese for local manufacturers and R&D centers.
In addition to advising on cost-effective licensing options (such as fixed licenses or MSCONE tokens), Solid & Soft provides structured software training and hands-on consulting for complex manufacturing problems directly on customer parts, empowering Vietnamese engineering teams to master world-class simulation technology.



